YJH Wonderful Plastics

Current Location：Home - 产品中心 - Chi Mei Corporation - General Purpose Grade

PA-709

Specificity :

Super high impact strength, excellent property under low temperature.

Applications :

Water carrier accessories / front cover and guard cover for automobile / Fender of motorcyle/ extrusion piping / helmet.

Characteristics :

Typical Properties	Test Method	Units	PA-709
Tensile Strength	ASTM D-638	kg/cm²	400
Flexural Strength	ASTM D-790	kg/cm²	640
IZOD Impact Strength	ASTM D-256	kg-cm/cm	45
Vicat Softening Temp.	ASTM D-1525	C	105
Melt Flow Index	ASTM D-1238	200C, 5kg g/10min (Cond.G)	0.5

Processing Guide :

Pre-drying the resin for 2~3 hours at 80C.
The injection temperature of barrel is among 180~230C.
The mold temperature is about 30~70C.
Do notretain the hot melt at the barrel for a long time between injection cycles.

Remarks :

It meets the requirements of UL, FDA, EN71, ENV1122, EPA 3050B and Japan High Polymer Center.

Documents Download :

Material Safety Data Sheet

Typical Characteristics

Typical characteristics(ISO standard)

Processing Conditions

certificates of environmental protection

RoHS